CORROSION Rust or corrosion on the tool occurs when the tool is stored outdoors and it is not well lubricated. This can be avoided by simple and easy lubrication and maintenance of hammer’s tool away from moisture Case CB6000 when not in use.
tool, and the impact force and energy is absorbed by bolts and the tool retaining screws and not by the tool itself. This causes Case CB6000 an erosion and the subsequent rupture of the tip. The breaking in these cases usually appears at the top of the hammer pin as a result of the idle strokes
DO NOT BEND Using the power of the arm of the hammer to break, or using the CB6000 Case tool of the hammer as a lever sooner or later it will break. The same thing occurs when the tool leans incorrectly or when it is introduced continuously between cracks.
