DO NOT BEND Using the power of the arm of the hammer to break, or using the tool of the hammer as a lever sooner or later it will break. The same thing occurs INDECO, ATLAS RAMMER, EURORAM, OMAL, FURUKAWA, OCM, PROMOVE, ITALDEM, COPCO, IDROMECANICA, MONTABERT, SOCOMEC, CATERPILLAR, when the tool leans incorrectly or when it is introduced continuously between cracks.

This happens when the piston does not stroke the hammer tool, and the impact force and energy is absorbed by bolts and the tool retaining screws and not by the tool itself. This causes an erosion and the subsequent rupture of the tip. The breaking in these cases usually appears at the top OCM, OMAL, INDECO, ATLAS CATERPILLAR, RAMMER, SOCOMEC, FURUKAWA, COPCO, ITALDEM, EURORAM, PROMOVE, MONTABERT, IDROMECANICA, of

it is recommended that the tools be heated before use and if it is possible use at low speed for a progressive increase in temperature of SOCOMEC, OCM, ATLAS EURORAM, OMAL, CATERPILLAR, IDROMECANICA, FURUKAWA, INDECO, PROMOVE, ITALDEM, RAMMER, MONTABERT, COPCO, the machinery. CORROSION. Rust or corrosion on the tool occurs when the tool is stored outdoors and it is not well lubricated.