tool, chisel, moil-point tool, hydraulic hammer, indeco, montabert, npk, rammer, socomec
Welcome to CTH Tools !

At CTH Tools you will find the largest stock in the market for any brand of hydraulic breaker. Our permanent stock contains the most commonly used tools: moil point, chisel, pyramid and blunt.


But you can have the tool you need most, with the characteristics you determine. Because an Rhino tool is a custom-made tool.

Custom Made Tool
Special Size

The efficiency of a tool depends on it's length. Tools have a standard length, but in many occasions, this length is not the ideal one for a particular hydraulic breaker. Because not all work is the same, nor does it have the same characteristics.

That's why one of the advantages of an Rhino tool is that the length varies according to your needs.

You are the one who decides the length of the tool, because only you know what you need.

Specific Use

The possibilities offered by a hydraulic breaker are infinite, as infinite as the number of jobs to accomplish. The most frequent tend to be moving earth or cutting and knocking down.

But more and more, tool capabilities are greater, and they are used for things like cutting slate, wood or other materials. They are also used for moving and placing posts or for cleaning residuals.

Hammer tools for small breakers
Chisel tool
Suitable for all earthworking or narrow-section excavation jobs on medium to hard stratified rock.
 
Moil point tool
Suitable for breaking up concrete, or medium-hard non-stratified rock. Secondary demolitions: average, hard or extremely hard blocks.
 
Asphalt cutter
Suitable for cutting asphalt, breaking up flooring, as well as brick or sandstone walls.
 
Wood cutting chisel
Suitable for felling trees and cutting large tree stumps.
 
Pile driver
Suitable for pilework or press-moulded supports for guardrails, etc.
 
Shovel-shaped tool
Suitable for cutting asphalt, breaking up flooring, as well as brick or sandstone walls, where the working direction of the tool is perpendicular to the direction of the machine.
 
Pyramidal point
Suitable for demolishing hard reinforced concrete flooring, as well as sedimentation material.
 
Hammer tools for mid-range breakers
Chisel tool
Suitable for all earthworking or narrow-section excavation jobs on medium to hard stratified rock.
 
Moil point tool
Suitable for breaking up concrete, or medium-hard non-stratified rock. Secondary demolitions: average, hard or extremely hard blocks.
 
Cobra chisel tool
Suitable for all types of excavation work on medium-hard to hard rock, non-stratified rock or rock which tends to pulverise when being broken up, «puddings».
 
Pyramidal point
Suitable for demolishing hard reinforced concrete flooring, as well as sedimentation material.
 
Blunt tool
Suitable for breaking up blocks of any hardness, or to reduce the size of rubble.
 
Hammer tools for large breakers
Chisel tool
Suitable for all earthworking or narrow-section excavation jobs on medium to hard stratified rock.
 
Moil point tool
Suitable for breaking up concrete, or medium-hard non-stratified rock. Secondary demolitions: average, hard or extremely hard blocks.
 
Cobra chisel tool
Suitable for all types of excavation work on medium-hard to hard rock, non-stratified rock or rock which tends to pulverise when being broken up, «puddings».
 
Blunt tool
Suitable for breaking up blocks of any hardness, or to reduce the size of rubble.
 

 



Articles:
LOW TEMPERATURES

LOW TEMPERATURES At low temperatures it is recommended that the tools be heated before use and if it is possible tool, indeco, chisel, hydraulic montabert, hammer, tool, npk, moil-point rammer, socomec use at low speed for a progressive increase in temperature of the machinery.

Recomandations

the tool itself. This causes an erosion and tool, socomec chisel, npk, moil-point hammer, montabert, rammer, indeco, hydraulic tool, the subsequent rupture of the tip. The breaking in these cases usually appears at the top of the hammer pin as a result of the idle strokes when the tip of the tool is separated from the rest of the hammer. CONSTANT LUBIRICATION. Even if

CONSTANT LUBIRICATION

CONSTANT LUBIRICATION Even if the hammer is provided with montabert, hydraulic tool, rammer, indeco, npk, moil-point hammer, tool, chisel, socomec a lubrication system, it is necessary to lubricate the tip of the tool to avoid the friction between metals.

Contact:
CTH Parts SRL
Tax Identification Number: RO39853909
Trade Register: J22/2390/2018
Share capitall: 10000 Lei

Address:
062202 Bucuresti, Str. Preciziei 32
Telephone:
+40.737.242.777

Working hours:
Monday-Friday: 08:00 - 17:00
Saturday: 09:00 - 12:00  
E-mail:
info@cthparts.ro

Website:
www.cuipicon.ro