not stroke the hammer tool, and the impact force and energy is absorbed by bolts and the tool retaining screws and not by the tool itself. This causes an erosion and CB735 Case the subsequent rupture of the tip. The breaking in these cases usually appears at the top of the hammer pin
cracks. LOW TEMPERATURES. At low temperatures it is recommended that the tools be heated before use and if it is possible use at low speed for a progressive increase in temperature of the machinery. CORROSION. Rust or corrosion on the tool CB735 Case occurs when the tool is stored outdoors
DO NOT BEND Using the power of the arm of the hammer to break, or using the CB735 Case tool of the hammer as a lever sooner or later it will break. The same thing occurs when the tool leans incorrectly or when it is introduced continuously between cracks.