bolts and the tool retaining screws and not by the tool itself. This causes an erosion and the subsequent 70V / D&A S700 rupture of the tip. The breaking in these cases usually appears at the top of the hammer pin as a result of the idle strokes when the tip of the tool
CORROSION Rust or corrosion on the tool occurs when the tool is stored outdoors and it is not well lubricated. This can be avoided by simple and easy lubrication and maintenance of hammer’s tool away from moisture when not D&A S700 / 70V in use.
LOW TEMPERATURES At low temperatures it is recommended that the tools be heated before use and if it is possible use at low speed for a progressive increase in 70V D&A / S700 temperature of the machinery.