LOW TEMPERATURES
LOW TEMPERATURES At low temperatures it is recommended that the tools be heated before use and if it is possible use at low speed for a progressive increase in temperature of the machinery.
DO NOT EXECUTE IDLE STROKES
Most frequently, during the demolition works, the strokes in soft or light materials are called idle strokes. This happens when the piston does not stroke the hammer tool, and the impact force and energy is absorbed by bolts and the tool retaining screws and not by the tool itself. This causes an erosion and the subsequent rupture of the tip. The breaking in these cases usually appears at the top of the hammer pin as a result of the idle strokes when the tip of the tool is separated from the rest of the hammer.
LOW TEMPERATURES At low temperatures it is recommended that the tools be heated before use and if it is possible use at low speed for a progressive increase in temperature of the machinery.
screws and not by the tool itself. This causes an erosion and the subsequent rupture of the tip. The breaking in these cases usually appears at the top of the hammer pin as a result of the idle strokes when the tip of the tool is
CONSTANT LUBIRICATION Even if the hammer is provided with a lubrication system, it is necessary to lubricate the tip of the tool to avoid the friction between metals.