CORROSION Rust or corrosion on the tool occurs when the tool is stored outdoors and IM 50 it is not well lubricated. This can be avoided by simple and easy lubrication and maintenance of hammer’s tool away from moisture when not in use.
DO NOT BEND Using the power of the arm of the hammer 50 IM to break, or using the tool of the hammer as a lever sooner or later it will break. The same thing occurs when the tool leans incorrectly or when it is introduced continuously between cracks.
not stroke the hammer tool, and the impact force and energy is absorbed by bolts and the tool retaining screws and not IM 50 by the tool itself. This causes an erosion and the subsequent rupture of the tip. The breaking in these cases usually appears at the top of the hammer pin as a result of