LOW TEMPERATURES
LOW TEMPERATURES At low temperatures it is recommended that the tools be heated HP 3500 3500 UP - 3500 - MES before use and if it is possible use at low speed for a progressive increase in temperature of the machinery.
LOW TEMPERATURES At low temperatures it is recommended that the tools be heated HP 3500 3500 UP - 3500 - MES before use and if it is possible use at low speed for a progressive increase in temperature of the machinery.
DO NOT BEND Using the power of the arm of the hammer to break, or 3500 HP 3500 UP MES - 3500 - using the tool of the hammer as a lever sooner or later it will break. The same thing occurs when the tool leans incorrectly or when it is introduced continuously between cracks.
are called idle strokes. This happens when the 3500 MES 3500 HP UP - - 3500 piston does not stroke the hammer tool, and the impact force and energy is absorbed by bolts and the tool retaining screws and not by the tool itself. This causes an erosion and the subsequent rupture of the tip. The breaking in these cases usually