DO NOT BEND Using the power of the arm of the hammer to break, or using the tool of the hammer as a lever sooner or later it will break. The same thing occurs when 150 KM the tool leans incorrectly or when it is introduced continuously between cracks.
it is KM 150 possible use at low speed for a progressive increase in temperature of the machinery. CORROSION. Rust or corrosion on the tool occurs when the tool is stored outdoors and it is not well lubricated. This can be avoided by simple and easy lubrication and maintenance of hammer’s
impact force and energy is absorbed by bolts and the tool retaining screws and not by the tool itself. This causes an 150 KM erosion and the subsequent rupture of the tip. The breaking in these cases usually appears at the top of the hammer pin as a result of the idle strokes when