CORROSION Rust or corrosion on the tool occurs when the tool is stored outdoors and it is not well lubricated. This can SB 40 be avoided by simple and easy lubrication and maintenance of hammer’s tool away from moisture when not in use.
DO NOT BEND Using the 40 SB power of the arm of the hammer to break, or using the tool of the hammer as a lever sooner or later it will break. The same thing occurs when the tool leans incorrectly or when it is introduced continuously between cracks.
absorbed by bolts and the tool retaining screws and not by SB 40 the tool itself. This causes an erosion and the subsequent rupture of the tip. The breaking in these cases usually appears at the top of the hammer pin as a result of the idle