Teledyne TB 2575

TB 2575 LOW TEMPERATURES At low temperatures it is recommended that the tools be heated before use and if it is possible use at low speed for a progressive increase in temperature of the machinery.

is absorbed by bolts and the tool retaining screws and not by the tool itself. This causes an erosion and the subsequent rupture of the tip. The breaking in these cases usually TB 2575 appears at the top of the hammer pin as a result of the idle

CORROSION Rust or corrosion on the tool occurs when the tool is stored outdoors and it is not well lubricated. This can be avoided by simple and easy lubrication and maintenance of hammer’s tool away from moisture when 2575 TB not in use.